Assembly 25/48
RE29162-XE-B/10.20, DBET.../...XE,
Bosch Rexroth AG
7.3.1 Requirements on the valve subplate
WARNING
Explosion hazard caused by overheating!
Non-compliance with the requirements for the valve subplate will void the explosion
protection.
▶
Observe the prescribed minimum distance when assembling several valves to
a valve battery.
▶
Observe the prescribed minimum size and minimum thermal conductivity of the
valve connection surface.
Recommended subplates, see chapter 7.6 "Required accessories".
7.4 Prior to assembly
WARNING
Explosion hazard due to wrong area of application!
A valve which is not approved for the area of application may cause an explosion!
▶
Check whether all the explosion protection marks on the name plate of the valve
comply with the information in these operating instructions.
▶
Please check if you have the right valve type by means of the type designation on
the name plate of the valve.
▶
Make sure that the zone and the temperature class correspond to the area of
application of the valve.
▶
Check the scope of delivery for completeness and possible transport damage.
▶
Also observe the safety instructions in chapter 2.6 "Product-specific safety
instructions".
▶
Transport protection elements (e.g. cover plates, protective plugs) must be
removed prior to use in an explosive atmosphere.
7.5 Required tools
You only require standard tools to assemble the valve.
