Assembly 23/44
RE25802-XC-B/07.19, DB...5X/...XC
Bosch Rexroth AG
7.4 Prior to assembly
WARNING
Explosion hazard due to wrong area of application!
A valve which is not approved for the area of application can cause explosions!
▶
Check whether all the explosion protection marks on the name plate of the valve
comply with the information in these operating instructions.
▶
Please check if you have the right valve type by means of the type designation
on the name plate of the valve.
▶
Check whether the zone assignment and the temperature class correspond
to the area of application of the valve.
▶
Check the scope of delivery for completeness and possible transport damage.
▶
Also observe the safety instructions in chapter 2.6 "Product-specific
safety instructions".
▶
Check whether the sealing is undamaged.
▶
Transport protection elements (e.g. cover plates, protective plugs) must
be removed prior to use in an explosive atmosphere. Apart from that, plastic caps
are not admissible for use in explosive atmospheres.
7.5 Required tools
You only require standard tools to assemble the valve.
7.6 Required accessories
The following accessories are recommended for the connection of the valve. These
accessories are not included in the scope of delivery and can be ordered separately
from Bosch Rexroth:
For reasons of stability only use the valve mounting screws listed
in
"Data sheet 25802-XC"
.
Subplates with dimensions for valves with porting pattern according to
ISO 6264 are listed in the
"Data sheet 45100"
.
The address of our responsible sales organizations can be found on the Internet on
www.boschrexroth.com
and in the appendix 16.1 "List of addresses".
Valve mounting screws,
valves for subplate mounting
Subplates
Ordering address
for accessories and valves
