20/44
Transport and storage
Bosch Rexroth AG
, DB...5X/...XC, RE25802-XC-B/07.19
6 Transport and storage
6.1 Valve transport
CAUTION
Danger of damage to property and personal injuries!
If transported improperly, the valve may fall down and cause damage and/or
injuries since the parts are e.g. sharp-edged, oily, instable, loose or bulky.
▶
Use the original packaging for transport.
▶
Use personal protective equipment (such as gloves, working shoes, safety
goggles, working clothes, etc.).
▶
Comply with the national laws and regulations regarding occupational health
and safety and transport.
▶
Do not transport the valve using components with little stability.
Sharp edges!
Danger of cut injuries!
▶
Wear suitable protective equipment for the transport of the safety valve.
Further information regarding transport is available from Bosch Rexroth,
see chapter 16.1 "List of addresses".
Notify your responsible sales contact person any transport damage within one
week. The addresses of the sales subsidiaries can be found on the Internet at:
http:/www.boschrexroth.com/adressen
6.2 Storing the hydraulic valve
Valves are delivered in a perfect state.
For transporting and storing the product, always observe the environmental
conditions specified in
"Data sheet 25802-XC"
. Improper storage may damage
the valve.
Valves can be stored for up to 12 months under the following conditions:
▶
Comply with a storage temperature range as specified in
"Data sheet 25802-XC".
▶
The relative air humidity must not exceed 65%.
▶
The storage rooms must provide 100% UV protection.
▶
No ozone formation may occur near the storage facility.
▶
Do not store the valve outdoors but in a well-ventilated room.
▶
The storage facilities must be free from etching substances and gases.
▶
Protect the valve against humidity, particularly ground humidity. Store the valve
on a shelf or on a pallet.
▶
Store the valve protected against impacts and sliding and do not stack it.
