16 / 52
ctrlX HMI DE0015, DE0021
UL/CSA certified
Bosch Rexroth AG
R911405731, Edition 03
Table 14: Standards for electromagnetic compatibility (EMC)
Standard
Title
DIN EN 61000-6-2 Electromagnetic compatibility (EMC)
Part 6-2: Generic standards – Noise immunity for industrial environments (IEC
61000-6-2:2019)
DIN EN 61000-6-4 Electromagnetic compatibility (EMC)
Part 6-4: Generic standards – Emission standard for industrial environments (IEC
61000-6-4:2007+A1:2011)
Loss of CE conformity due to modifications at the device
CE marking applies only to the device upon delivery. After modifying the device, verify the CE
conformity.
8.3
FCC
This device was tested and complies with the limit values for a digital device of class A as per part 15 of
the FCC rules. These limit values should ensure an appropriate protection against harmful interferences
if the device is operated in an industrial area. This device creates and uses high-frequency, it can
radiate it and it can cause harmful interferences of the wireless communication if it is not installed
and used as specified in the operating instructions. Harmful interferences can result if this device is
operated on a residential area. In this case, the user has to eliminate the interferences at his own
expense.
This device complies with part 15 of the FCC rules. Operation is subject to the following two condi-
tions:
•
This device may not cause harmful interferences.
•
This device has to tolerate any receiving interferences, including interferences that can cause
undesired operation.
8.4
UL/CSA certified
The devices are certified according to
•
UL 62368 (Industrial Control Equipment) and
•
CSA22.2 No. 61010-2-201 (CSA)
However, there can be combinations or extension stages with a limited or missing certification. Thus,
verify the registration according to the UL marking on the device.
Loss of UL/CSA conformity due to modifications at the device
UL and CSA marking applies only to the device upon delivery. After modifying the device, verify
the UL and the CSA conformity.
