19 / 50
ctrlX CORE
Interface description
Bosch Rexroth AG
R911405645, Edition 05
No.
Name
Connection type
Connector type
(integrated)
Mating connector and cable
(From outside)
X2 X3 X3
PLUS
➃
XF51
Ethernet
10/100/1000 MBit
1G Bit/s Ethernet (configurable)
TSN-capable (Time-Sensitive Networking)
RJ45 socket
8-pin
RJ45 plug
(twisted pair, 8-wire)
‒ ✓ ✓
➄
CF01
Slot for SD card
‒
SD card
✓ ✓ ✓
➅
XD10
24 V plug, U
L
2-pin
2-pin
✓ ✓ ✓
➆
GB01
Battery case
‒
‒
✓ ✓ ✓
➇
XF23
Ethernet
10/100 MBit Ethernet (configurable)
RJ45 socket
8-pin
RJ45 plug
(twisted pair, 4-wire)
‒ ‒ ✓
➈
XF24
Ethernet
10/100 MBit Ethernet (configurable)
RJ45 socket
8-pin
RJ45 plug
(twisted pair, 4-wire)
‒ ‒ ✓
➉
XD10
24 V plug U
L
, U
P
4-pin
4-pin
‒ ‒ ✓
9.1.1
Local bus interface Ethercat of ctrlX CORE
PLUS
X3
The local bus connected to the ctrlX CORE
PLUS
at the right is a 100 MBit/s LVDS Ethercat bus and
the cycle time between 2
ms and 10
ms. The ctrlX CORE
PLUS
can be extended with up to 20 ctrlX
I/O modules. The number of connectable modules depends on the total current consumption of the
ctrlX IO modules. The ctrlX CORE
PLUS
can provide up to 3
A for the current supply of the modules.
The ctrlX CORE
PLUS
supplies the connected I/O modules with the logic voltage U
L
and the periphery
voltage U
P
. The voltages and currents fed in are measured internally and applied to the process data.
For U
L
, only the current consumption of the infeed terminal and the I/O modules. For the integration
into the parent system, the respective ESI files are available. For the ESI files, go to
Synchronizing the application
The application is synchronized in the "SM synchronous" mode.
Int
er
faces