Assembly 25/48
RE 29115-XE-B/09.19, 4WRZ..7X/...XE...,
Bosch Rexroth AG
7.4 Prior to assembly
WARNING
Explosion hazard due to wrong area of application!
A valve which is not approved for the area of application may cause an explosion!
▶
Check whether all the explosion protection marks on the name plate of the valve
comply with the information in these operating instructions.
▶
Please check if you have the right valve type by means of the type designation
on the name plate of the valve.
▶
Make sure that the zone and the temperature class correspond to the area
of application of the valve.
▶
Check the scope of delivery for completeness and possible transport damage.
▶
Also observe the safety instructions in chapter 2.6 “Product-specific safety
instructions”.
▶
Transport protection elements (e.g. cover plates, protective plugs) must
be removed prior to use in an explosive atmosphere.
7.5 Required tools
In order to assemble the valve, you need standard tools only.
7.6 Required accessories
The following accessories are recommended for the connection of the valve. These
accessories are not included in the scope of delivery and can be ordered separately
from Bosch Rexroth:
For information on the valve mounting screws refer to
“Data sheet 29115-XE”
.
For subplates with dimensions for valves with porting pattern according to ISO
4401, refer to
“Data sheet 45100”
.
The addresses of our responsible sales organizations can be found online under
www.boschrexroth.com
and in appendix 16.1 “List of addresses”.
Valve mounting screws
Subplates
Ordering address
for accessories
and valves
