background image

RE 51433-B/04.10  |  30, 50, 80 NFF2 

Bosch Rexroth AG 

7/30

General safety instructions

About this document | General safety instructions

Safety instructions in this document

2.4 

In these instructions, there are safety instructions before an instruction whenever 

there is a risk of personal injury or damage to property. The measures described 

for preventing these hazards must be observed.
Safety instructions are set out as follows:

Type of risk!

Consequences

Precautions

 

f

Warning sign (warning triangle):

 

 Draws attention to the danger

Signal word:

 

 Identifies the degree of danger

Type of risk:

 

 Specifies the type or source of danger

Consequences:

 

 Describes the consequences of non-compliance

Precautions:

 

 Specifies how the danger can be prevented

The signal words have the following meaning:

Signal words/warning signs

Table 2: 

Signal word

Application

DANGER!

Indicates an 

imminently 

hazardous situation which, if not avoided, 

will certainly result in serious injury or even death.

WARNING!

Indicates a 

potentially 

hazardous situation, which, if not avoided, 

could result in serious injury or even death.

CAUTION!

Indicates a 

potentially hazardous

 situation which, if not avoided, 

could result in minor or moderate injury or damage to equipment. 

If this information is disregarded, the operating procedure may be im-

paired.

SIGNAl WORD!

Summary of Contents for Rexroth 30 NFF2





























Reviews: