Bosch PXY8 KV Series, Instructions For Use Manual

Page: 22 / 28

en
Cleaning and servicing
22
Setting Selection Description
Automatic light activation
¡
Off
¡
On
1
– The light is switched on when
the hob is switched on.
You can set whether the lighting for the
extractor hood switches on automatic-
ally with the hob.
Automatic light deactivation
¡
Off
1
¡
On – The light switches itself off
when the hob is switched off.
You can set whether the lighting for the
extractor hood switches off automatic-
ally with the hob.
Disconnect - With this setting, you reset the saved
connections to the Wi-Fi or go back to
the extractor hood.
1 Factory setting (may vary according to model)
25 Cleaning and servicing
To keep your appliance working efficiently for a long
time, it is important to clean and maintain it carefully.
25.1 Cleaning products
You can obtain suitable cleaning products and glass
scrapers from customer service, a retailer or the online
shop www.bosch-home.com.
ATTENTION!
Unsuitable cleaning products may damage the sur-
faces of the appliance.
▶
Never use unsuitable cleaning products.
▶
Do not use cleaning products while the hob is still
hot. This may cause marks on the surface.
Unsuitable cleaning products
¡
Undiluted detergent
¡
Detergent intended for dishwashers
¡
Abrasive cleaning products
¡
Aggressive cleaning products such as oven spray
or stain remover
¡
Abrasive sponges
¡
High-pressure or steam jet cleaners
25.2 Cleaning the hob
Clean the hob after every use to stop cooking residues
from getting burnt on.
Requirement:
The hob must be cold. Do not allow the
hob to cool down if it has sugar stains, plastic or alu-
minium foil on it.
1.
Remove heavy soiling using a glass scraper.
2. Clean the hob with a cleaning agent for glass
ceramic.
Follow the cleaning instructions on the packaging of
the cleaning agent.
Tip:
You can achieve good cleaning results using a
special sponge for glass ceramic.
25.3 Cleaning the hob surround
If the hob frame is dirty or stained after use, clean this.
Note:
Do not use a glass scraper.
1.
Clean the hob frame with hot soapy water and a soft
cloth.
Wash new sponge cloths thoroughly before use.
2.
Dry with a soft cloth.
26 Troubleshooting
You can rectify minor faults on your appliance yourself.
Read the troubleshooting information before contacting
after-sales service. This will avoid unnecessary costs.
WARNING ‒ Risk of injury!
Improper repairs are dangerous.
▶
Repairs to the appliance should only be carried out
by trained specialist staff.
▶
If the appliance is defective, call Customer Service.
WARNING ‒ Risk of electric shock!
Incorrect repairs are dangerous.
▶
Repairs to the appliance should only be carried out
by trained specialist staff.
▶
Only use genuine spare parts when repairing the
appliance.
▶
If the power cord of this appliance is damaged, it
must be replaced with a special connection cable,
which is available from the manufacturer or his Cus-
tomer Service.
26.1 Warnings
If a problem occurs, instructions, warnings or error
messages are shown automatically on the display.
To eliminate the problem, follow the instructions on the
touch display. If required, contact customer service and
specify the exact fault code.
Notes
¡
If an error occurs, the appliance does not switch to
standby mode.
¡
In order to protect the appliance's electronic parts
from overheating or surge currents, the hob may
temporarily reduce the power level.