manualshive.com logo in svg

Bosch PXX D6 Series, Instruction Manual

Share
Download
Bosch PXX D6 Series Instruction Manual Download Page 60

en

    Trouble shooting

60

Notes

■

If 

“

 appears on the display, press and hold the 

button for the relevant cooking zone in order to read 

the fault code.

■

If the fault code is not listed in the table, disconnect 

the hob from the mains power supply and wait 

30 seconds before reconnecting it. If this code is 

displayed again, contact the technical after-sales 

service and specify which fault code has appeared.

■

If a fault occurs, the appliance will not switch to 

standby mode.

The cooking sensor indicator 

does not light up.

The cooking sensor is not responding and the 

indicator does not light up.

Replace the 3 V CR2032 battery. For more information, see the 

section entitled 

~

 "Changing the battery"

.

If this does not solve the problem, press and hold the symbol on 

the cooking sensor for 8–10 seconds and then reconnect the 

cooking sensor to the hob. For more information, see the section 

entitled 

~

 "Connecting the wireless temperature sensor to the 

control panel"

.

If the problem persists, contact our technical after-sales service.

The indicator on the sensor 

flashes twice.

The battery in the cooking sensor is almost flat. 

You may be interrupted the next time you cook 

by the battery running out.

Replace the 3 V CR2032 battery. For more information, see the 

section entitled 

~

 "Changing the battery"

.

The indicator on the sensor 

flashes three times.

The connection to the cooking sensor has been 

broken.

Press and hold the symbol on the cooking sensor for 8–10 sec-

onds and then reconnect the cooking sensor to the hob. For more 

information, see the section entitled 

~

 "Connecting the wireless 

temperature sensor to the control panel"

.

“Š‹‹‹
“Š‹‚‹

The operating voltage is incorrect and outside of 

the normal operating range.

Contact your electricity supplier.

—…‹‹

The hob is not connected correctly.

Disconnect the hob from the mains. Ensure that the hob has been 

connected as shown in the circuit diagram.

š“

Demo mode is activated.

Disconnect the hob from the mains. Wait for 30 seconds before 

reconnecting it. Touch any sensor in the next three minutes. 

Demo mode has now been deactivated.

Display

Possible cause

Solution

Do not place hot cookware on the control panel.

Summary of Contents for PXX D6 Series

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands