English |
9
Bosch Power Tools
1 609 929 W69 | (22.3.10)
en
Safety Notes
General Safety Rules
Read all warnings and instructions
provided with the tile cutter or the
sawing station.
Safety Warnings for Tile Cutters
f
Wear protective gloves when cutting tiles.
Sharp edges develop on broken tiles and can
cause injuries to the operator.
f
Use the tile cutter only for cutting the mate-
rials listed under Intended Use.
Marble or
granite as well as tiles with a rough surface
structure and natural stone tiles cannot be
cut.
Functional Description
Intended Use
The tile cutter is intended for cutting ceramic
tiles to a maximum thickness of 10 mm.
Product Features
The numbering of the product features refers to
the illustrations on the graphics pages.
PTC 1
1
Tile cutter
2
Stop with scale
3
Break-off cones
PLS 300*
4
Locking knob for height adjustment
5
Guide rail
6
Locking lever of the guide rail
7
Bridge
8
Base unit
9
Locking knob for various mitre angles
(horizontal)
10
Angle indicator (horizontal)
*The product shown or described is not part of the
standard delivery scope.
Technical Data
Operation
Note:
The tile cutter PTC 1 can be used both for
free-hand cuts as well as for cutting tiles in com-
bination with the sawing station PLS 300.
For precise working, mitre angles from maxi-
mum –45° to +45° can be set on the sawing sta-
tion.
Preparing for Operation (with PLS 300)
The stop
2
is supplied as two parts, folded to-
gether.
– Before using for the first time, put the two
parts of the stop
2
together, so that they can-
not be taken apart afterwards.
Lengthway Cuts (see figures A1 – A3)
– Loosen the locking knob
4
a few turns.
– Turn the locking lever
6
of the guide rail left-
ward and fold the guide rail
5
upward.
– Place stop
2
centred in the groove of bridge
7
and slide it flush into base unit
8
.
– Mark the desired cutting line on the work-
piece.
– Place down the workpiece with the visible
side up, flat against the stop
2
.
– Fold the guide rail
5
down and align the
workpiece cutting line to the scale of the
stop
2
.
– Press down the guide rail
5
in the area of the
workpiece with your flat hand.
– Tighten the locking knob
4
.
– Lock the guide rail
5
with locking lever
6
.
Tile cutter
PTC 1
Article number
3 603 M04 2..
Max. cutting height
mm
10
Max. cutting length for
crossway cuts (90°)
mm
340*
Mitre/Bevel Angle
Horizontal
°
±
45*
Weight according to
EPTA-Procedure 01/2003
kg
0.2
* only in combination with PLS 300
OBJ_BUCH-1220-001.book Page 9 Monday, March 22, 2010 11:39 AM
