English |
11
Bosch Power Tools
1 609 92A 0RA | (6.11.14)
Robert Bosch GmbH, Power Tools Division
70764 Leinfelden-Echterdingen, GERMANY
Leinfelden, 10.10.2014
Noise/Vibration Information
The measured values of the machine are listed in the table on
page 63.
Sound emission values determined according to
EN 60745-2-11.
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN 60745.
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
Mounting and Operation
Maintenance and Cleaning
For safe and proper working, always keep the machine
and the ventilation slots as well as the tool holder
clean.
Clean the saw blade holder regularly. For this, remove the saw
blade from the machine and lightly tap out the machine on a
level surface.
Check the guide roller regularly. If worn, it must be replaced
through an authorised Bosch after-sales service agent.
Lubricate the guide roller occasionally with a drop of oil (see
figure 14, page 70).
If the replacement of the supply cord is necessary, this has to
be done by Bosch or an authorized Bosch service agent in or-
der to avoid a safety hazard.
After-sales Service and Application
Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch’s application service team will gladly answer questions
concerning our products and their accessories.
In all correspondence and spare parts order, please always in-
clude the 10-digit article number given on the type plate of
the machine.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: [email protected]
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Henk Becker
Executive Vice President
Engineering
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
Action
Figure
Page
Inserting the Saw Blade
1
64
Removing the Saw Blade
2
64
Adapting the position of the guide
roller
3
64
Mounting the splinter guard
4
65
Mounting and use of “Cut Control”
5
65
Connecting the dust extraction
6
66
Adjusting the Cutting Angle
7
66–67
Switching on the sawdust blower
device 8
67
Switching On and Off
9
68
Guide the power tool toward the
workpiece only when switched on
10
68
Plunge Cutting
11
69
Lubrication when cutting metal
12
69
Selecting Accessories
–
71–72
Action
Figure
Page
OBJ_BUCH-1524-004.book Page 11 Thursday, November 6, 2014 9:23 AM
