English |
31
Bosch Power Tools
2 609 005 858 | (15.12.11)
Inserting Screwdriver Bits into the Bit Magazine
(see figure B–C)
f
When changing the application tool, wear safety goggles. Do not
stare directly into the tool holder.
When changing the tool insert, it
can be thrown out toward the front.
f
Only insert one screwdriver bit per chamber into the bit magazine.
Use only short standard screwdriver bits.
Longer screwdriver bits
cannot be loaded into the bit magazine.
–
Turn the bit magazine
11
until an empty chamber can be seen in view-
ing window
3
.
–
Push the sliding switch
7
toward the front.
–
Insert the screwdriver bit
1
directly into the tool holder
2
.
–
Push the sliding switch
7
to the rear to load the screwdriver bit
1
into
bit magazine
11
.
–
As soon as you push the sliding switch
7
to the rear or actuate the
On/Off switch
10
when in the rear position, the bit magazine
11
is illu-
minated for approx. 20 seconds.
Changing the Tool (see figure D)
f
When changing the application tool, wear safety goggles. Do not
stare directly into the tool holder.
When changing the tool insert, it
can be thrown out toward the front.
–
Turn the bit magazine
11
until the desired screwdriver bit
1
can be
seen in viewing window
3
.
–
Push the sliding switch
7
toward the front.
OBJ_BUCH-1564-001.book Page 31 Thursday, December 15, 2011 8:36 AM