English |
33
Bosch Power Tools
2 609 005 858 | (15.12.11)
Temperature Dependent Overload Protection
When using as intended for, the power tool cannot be subject to overload.
When the load is too high or the allowable battery temperature of 65 °C is
exceeded, the electronic control switches off the power tool until the tem-
perature is in the optimum temperature range again.
Working Advice
f
Apply the power tool to the screw only when it is switched off.
Ro-
tating tool inserts can slip off.
Maintenance and Service
Maintenance and Cleaning
f
Before any work on the machine (e. g., maintenance, tool change,
etc.) as well as during transport and storage, set the rotational di-
rection switch to the centre position.
Unintentional actuation of the
On/Off switch can lead to injuries.
f
For safe and proper working, always keep the machine and venti-
lation slots clean.
When the battery is no longer operative, please refer to an authorised af-
ter-sales service agent for Bosch power tools.
If the replacement of the supply cord is necessary, this has to be done by
Bosch or an authorized Bosch service agent in order to avoid a safety haz-
ard.
If the machine should fail despite the care taken in manufacturing and
testing procedures, repair should be carried out by an after-sales service
centre for Bosch power tools.
In all correspondence and spare parts order, please always include the
10-digit article number given on the type plate of the machine.
After-sales Service and Customer Assistance
Our after-sales service responds to your questions concerning mainte-
nance and repair of your product as well as spare parts. Exploded views
and information on spare parts can also be found under:
www.bosch-pt.com
OBJ_BUCH-1564-001.book Page 33 Thursday, December 15, 2011 8:36 AM
