Bosch Security Systems | 2008-12
PRS-1AIP1 IP Audio Interface
| Installation and User Instructions | Configuration
en
| 18
3.2.12 Security
It is recommended to set a password to prevent
unauthorized use of the CONFIGURATION,
UPDATE, STATUS and RESTART pages.
When a password is set for access to one or more of the
available functions, the user will get a pop up window
when accessing this function and has to enter the
password into the password field of the pop up window.
Additionally, a user name can be entered but this is not
necessary.
Configuration/Update password
Default: not set
Enter up to 24 characters to protect the configuration
and firmware updates pages of the device. Enter 25
characters to erase the current password. To log out
click on the Logout button below the menu bar. On the
Configuration and Update page only one user can log in
at a time. Other login attempts will be refused.
Status Page View Password
Default: not set
Enter up to 24 characters to protect viewing the devices
Status Page. Enter 25 characters to erase the current
password. To log out click on the Logout button below
the menu bar. On the Status page several users can log
in simultaneously.
Command/Reboot Password
Default: not set
Enter up to 24 characters to secure the Reboot page as
well as the access to all control and command interfaces
(WEB/CGI, Serial, TCP, and UDP). Enter 25 characters
to erase the current password. To log out click on the
Logout button below the menu bar. On the Reboot
page only one user can log in at a time. Other login
attempts will be refused.
SNMP Community RWrite
Default: not protected
Select the SNMP access rights for the Read and Write
Community. You can select between:
not protected,
Configuration/Update, Status Page View, Command/Reboot
and
no write access
.
SNMP Community Read
Default: not protected
Select the SNMP access rights for the Read Community.
You can select between:
not protected,
Configuration/Update, Status Page View, Command/Reboot
and
no access
.
Note that the Community RWrite setting takes priority.
This means that if the Community RWrite is set to
not
protected
, Community Read is ignored.
Submit / Cancel button
Submit saves the set values, restarts the device and
returns back to the last screen. Cancel restores the last
submitted values.
l
figure 3.13: Security screen (default)
