Bosch Security Systems | 2008-12
PRS-1AIP1 IP Audio Interface
| Installation and User Instructions | Configuration
en
| 10
3
Configuration
The IP Audio Interface uses dynamic HTML web pages
for configuration and status information monitoring.
Configuration parameters are stored in the IP Audio
Interface via the web browser.
3.1
Connect to web browser
Web browser
Open a web browser on a PC that is connected to the
same network as the IP Audio Interface.
IP address
Enter the announced IP address
of the IP Audio
Interface in the web browser address (URL) box (see
section 2.5).
The built-in web server generates the STATUS
page in
the web browser by default. When not, repeat the
installation process.
3.2 Configuration
page
Click CONFIGURATION
on top of the page. It opens
the
Network
menu on the left hand side as default. Here
you can set the parameters for the:
Network (default page)
•
Streaming
•
Partner Table
•
Outgoing Route Table
•
Control
Audio Settings
Supervision
Control I/O mapping
•
Control Input Mapping Table
•
Control Output Mapping Table
Serial
SNMP
Security
Default Settings
Caution
Your configuration parameters will be lost in
case the device is reset to factory default (see
section 1.3.1).
l
figure 3.1: Status screen example
l
figure 3.2: Configuration (Network) screen example
