Bosch PRA-APAS, Configuration Manual, Page: 6 / 44

6 en | Important product information Advanced public address server
2021-05 | V1.00 |
Configuration manual
Bosch Security Systems, B.V.
14. Fiber optical converters use invisible laser radiation. To prevent injury, avoid eye
exposure to the beam.
15. Devices for vertical (wall) mounting supporting a user interface for operation shall only be
mounted below 2 m height.
16. Devices installed above 2 m height may cause injury when falling down. Preventive
measures must be taken.
17. To prevent hearing damage do not listen at high volume levels for long periods.
18. An apparatus may use a lithium coin battery. Keep away from children. If ingested, high
risk of chemical burn hazard. Seek medical attention immediately.
1.2 Disposal instructions
Old electrical and electronic appliances.
Electrical or electronic devices that are no longer serviceable must be collected
separately and sent for environmentally compatible recycling (in accordance with the
European Waste Electrical and Electronic Equipment Directive).
To dispose of old electrical or electronic devices, you should use the return and
collection systems put in place in the country concerned.
1.3 Class A Notice for FCC and ICES 003
applies to U.S.A. and Canadian models only
Business Equipment
For commercial or professional use
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC and Canadian ICES‑003 requirements.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in residential area
is likely to cause harmful interference in which case the user will be required to
correct the interference at their own expense. Intentional or unintentional changes or
modifications not expressly approved by the party responsible for compliance shall not
be made. Any such changes or modifications may void the user’s authority to operate
the equipment.