background image

5

Switching on manually

1.

Press the chosen burner control knob and turn it 

anticlockwise to the required setting.

2.

Use any type of lighter or flame (cigarette lighter, matches, 

etc.) and bring it close to the burner.

Switching on automatically

If your hob can be switched on automatically (ignition 

sparkers):

1.

Press the chosen burner control knob and turn it 

anticlockwise to the maximum power setting.
While the control knob is still pressed down, sparks are 

produced on all burners. The flame ignites.

2.

Release the control knob.

3.

Turn the control knob to the required setting.

If it does not come on, turn the control knob to the off setting 

and repeat the steps above. This time, press and hold the 

control knob for longer (up to 10 seconds).

Risk of deflagration!

If after 15 seconds the flame does not ignite, switch off the 
burner and open a nearby window or door. Wait at least one 
minute before trying to switch the burner back on.

Safety system

Depending on the model, your hob may have a safety system 

(thermocouple) that prevents the flow of gas if the burners 

accidentally switch off.

To ensure that this device is active:

1.

Switch on the burner as usual.

2.

Without releasing the control knob, press and hold it down 

firmly for 4 seconds after lighting the flame.

Switching off a burner

Turn the corresponding control knob clockwise to the 0 setting.

Power levels

The progressive control knobs can be used to control the 

power needed, from minimum to maximum power.

Main switch/Hob lock (Main Switch)

The hob may have a main switch to cut off the mains gas 

supply and switch off all the burners at the same time. This 

switch is very practical if there are children in the house or, if for 

any reason, all the burners must be switched off quickly.

To lock the hob:

Press the main switch.
This switches off all the burners which are on. The hob is 

locked.

To unlock the hob:

1.

Turn all the control knobs to the "off" position.

2.

Press the main switch and turn it fully clockwise.

The mains gas supply is turned on. You can now use your hob 

normally.

Warnings

It is normal to hear a soft whistling noise while the burner is 

operating.
When it is first used, it is normal for the burner to give off 

odours. This does not pose any risk and does not indicate a 

malfunction. They will disappear in time.
An orange-coloured flame is normal. This is caused by the 

presence of dust in the atmosphere, spilt liquids, etc.
The kitchen will become hot and humid when this gas 

appliance is used. You must therefore ensure that the kitchen is 

well ventilated: Either keep the natural ventilation apertures 

open, or install a ventilation system (extractor hood).
Intense and prolonged use of the appliance may mean 

additional ventilation is required (for example, opening a 

window) or more effective ventilation (for example, increasing 

the hob's ventilation, if possible).
If the burner flames are accidentally blown out, switch off the 

burner operating control knob and do not try to relight it for at 

least one minute.

LJQLWLRQVSDUNHU

WKHUPRFRXSOH

Setting

Û

Control knob off

High flame

Maximum capacity or aperture and elec-

tricity on

Low flame

˜

Minimum capacity or aperture

$

%

$

%

Summary of Contents for PPC6 1 Series










Reviews: