first time
en
11
first time
7 Before using for the
first time
first time
Configure the settings for initial start-
up. Clean the appliance and ac-
cessories.
7.1 Initial use
1.
Remove the appliance from the
packaging.
2.
Ensure that all of the plastic mater-
ial has been removed.
3.
Place the appliance on a level sur-
face or worktop.
4.
Connect the LPG pipeline to the
cooktop inlet.
5.
Use the clamp to secure the gas
line connection to the appliance.
6.
Ensure that no gas is escaping be-
fore you ignite the burner.
‒
Brush the connection points of
the gas line with a brush and
soapy water.
‒
Open the gas valve and care-
fully observe whether bubbles
occur at the connection points.
‒
Close the gas valve immediately
if bubbles form.
‒
Adjust any leaking connection
points.
‒
Repeat the process until no
bubbles appear at the connec-
tion points.
7.2 Placing burner parts and
pan supports in their cor-
rect positions
You can find out how to correctly po-
sition the burner parts here.
1.
Ensure that the burner parts are
clean and dry.
2.
Position the burner lid precisely
and evenly.
The size of the burner lid must
match that of the burner.
Summary of Contents for PNP0E6V10I
Page 19: ......