12
| English
1 609 929 T98 | (9.12.09)
Bosch Power Tools
Technical Data
Assembly
Inserting/Replacing the Battery
Using alkali-manganese or rechargeable batter-
ies is recommended for operation of the meas-
uring tool.
To open the battery lid
5
, press on the latch
6
and fold the battery lid up. Insert the batter-
ies/rechargeable batteries. When inserting, pay
attention to the correct polarity according to the
representation on the inside of the battery lid.
Always replace all batteries/rechargeable bat-
teries at the same time. Do not use different
brands or types of batteries/rechargeable bat-
teries together.
f
Remove the batteries/rechargeable batter-
ies from the measuring tool when not using
it for longer periods.
When storing for longer
periods, the batteries/rechargeable batteries
can corrode and discharge themselves.
Operation
Initial Operation
f
Protect the measuring tool against mois-
ture and direct sun light.
f
Do not subject the measuring tool to ex-
treme temperatures or variations in tem-
perature.
As an example, do not leave it in
vehicles for longer periods. In case of large
variations in temperature, allow the measur-
ing tool to adjust to the ambient temperature
before putting it into operation. In case of ex-
treme temperatures or variations in tempera-
ture, the accuracy of the measuring tool can
be impaired.
f
Avoid heavy impact to or falling down of the
measuring tool.
Damage to the measuring
tool can impair its accuracy. After heavy im-
pact or shock, compare the laser line with a
known horizontal or vertical reference line.
f
Switch the measuring tool off during trans-
port.
When switching off, the levelling unit,
which can be damaged in case of intense
movement, is locked.
Cross-line Laser
PLL 360
Article number
3 603 F63 000
Working range (dia-
meter), to approx.
1)
20 m
Levelling Accuracy
±
0.4 mm/m
Self-levelling range,
typically
±
4°
Levelling duration,
typically
4 s
Operating temperature
+5 °C ... +40 °C
Storage temperature
–20 °C ... +70 °C
Relative air humidity, max.
90 %
Laser class
2
Laser type
635 nm, <1 mW
C
6
1
Tripod mount
1/4"
Batteries
Rechargeable batteries
4 x 1.5 V LR6 (AA)
4 x 1.2 V HR6 (AA)
Operating life time,
approx.
12 h
Weight according to
EPTA-Procedure 01/2003
0.5 kg
Dimensions
125 x 85 x 70 mm
1) The working range can be decreased by unfavourable
environmental conditions (e.g. direct sun irradiation).
Please observe the article number on the type plate of
your measuring tool. The trade names of the individual
measuring tools may vary.
OBJ_BUCH-979-002.book Page 12 Wednesday, December 9, 2009 12:50 PM
