14
| English
1 619 929 L90 | (13.2.13)
Bosch Power Tools
The Lithium-Ion battery can be charged at any time without reducing its service life.
Interrupting the charging procedure does not damage the battery.
The lithium ion battery is protected against deep discharging by the “Electronic Cell
Protection (ECP)”. When the battery is empty, the cordless worklight is switched off
by means of a protective circuit.
Do not continue to press the On/Off switch after the cordless worklight has been
automatically switched off.
The battery can be damaged.
To remove the battery
3
, press the battery unlocking button
4
and pull the battery out
of the cordless worklight toward the rear.
Do not exert any force.
The battery is equipped with a NTC temperature control which allows charging only
within a temperature range of between 0 °C and 45 °C. A long battery service life is
achieved in this manner.
Observe the notes for disposal.
Operation
Starting Operation
Inserting the battery
Use only original Bosch lithium ion batteries with the voltage listed on the
nameplate of your cordless worklight.
Using other batteries can lead to injuries
and pose a fire hazard.
Insert the charged battery
3
into the handle until it can be felt to engage and faces
flush against the handle.
Switching On and Off
The cordless worklight produces a light beam that emerges from the lamp
head 1.
To
start
the cordless worklight, press the On/Off switch
2
.
To
switch off
the cordless worklight, press the On/Off switch
2
again.
To save energy, only switch the cordless worklight on when using it.
Maintenance and Service
Maintenance and Cleaning
When the battery is no longer operative, please refer to an authorised after-sales ser-
vice agent for Bosch power tools.
OBJ_BUCH-1802-001.book Page 14 Wednesday, February 13, 2013 10:53 AM
