English |
19
Bosch Power Tools
1 609 929 S13 | (28.1.09)
g) If devices are provided for the connec-
tion of dust extraction and collection fa-
cilities, ensure these are connected and
properly used.
Use of dust collection can
reduce dust-related hazards.
4) Power tool use and care
a) Do not force the power tool. Use the cor-
rect power tool for your application.
The
correct power tool will do the job better
and safer at the rate for which it was de-
signed.
b) Do not use the power tool if the switch
does not turn it on and off.
Any power
tool that cannot be controlled with the
switch is dangerous and must be re-
paired.
c) Disconnect the plug from the power
source and/or the battery pack from the
power tool before making any adjust-
ments, changing accessories, or storing
power tools.
Such preventive safety
measures reduce the risk of starting the
power tool accidentally.
d) Store idle power tools out of the reach of
children and do not allow persons unfa-
miliar with the power tool or these in-
structions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
e) Maintain power tools. Check for mis-
alignment or binding of moving parts,
breakage of parts and any other condi-
tion that may affect the power tool’s op-
eration. If damaged, have the power tool
repaired before use.
Many accidents are
caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean.
Prop-
erly maintained cutting tools with sharp
cutting edges are less likely to bind and
are easier to control.
g) Use the power tool, accessories and tool
bits etc. in accordance with these in-
structions, taking into account the work-
ing conditions and the work to be per-
formed.
Use of the power tool for
operations different from those intended
could result in a hazardous situation.
5) Service
a) Have your power tool serviced by a qual-
ified repair person using only identical
replacement parts.
This will ensure that
the safety of the power tool is maintained.
Safety Warnings for Circular Saws
f
DANGER: Keep hands away from cutting ar-
ea and the blade. Keep your second hand on
auxiliary handle, or motor housing.
If both
hands are holding the saw, they cannot be
cut by the blade.
f
Do not reach underneath the workpiece.
The guard cannot protect you from the blade
below the workpiece.
f
Adjust the cutting depth to the thickness of
the workpiece.
Less than a full tooth of the
blade teeth should be visible below the work-
piece.
f
Never hold the workpiece being cut in your
hands or across your leg. Secure the work-
piece to a stable platform.
It is important to
support the work properly to minimize body
exposure, blade binding, or loss of control.
f
Hold the power tool only by the insulated
gripping surfaces when performing an oper-
ation where the cutting tool may contact
hidden wiring or its own cord.
Contact with
a “live” wire will also make exposed metal
parts of the power tool “live” and shock the
operator.
f
When ripping always use a rip fence or
straight edge guide.
This improves the accu-
racy of cut and reduces the chance of blade
binding.
f
Always use blades with correct size and
shape (diamond versus round) of arbour
holes.
Blades that do not match the mount-
ing hardware of the saw will run eccentrical-
ly, causing loss of control.
f
Never use damaged or incorrect blade
washers or bolt.
The blade washers and bolt
were specially designed for your saw, for op-
timum performance and safety of operation.
OBJ_BUCH-841-004.book Page 19 Wednesday, January 28, 2009 11:24 AM
