English |
15
Bosch Power Tools
1 609 929 Y14 | (23.8.11)
f
Never point the spray jet against yourself, towards oth-
er persons or animals. Keep your hands and other body
parts away from the spray jet. If the spray jet should
penetrate the skin, seek medical attention immediate-
ly from a doctor.
The material being sprayed can even
penetrate the skin through a glove and be injected into
your body.
f
Do not treat an injection as a simple cut.
A high-pressure
spray is able to inject toxins into the body and cause seri-
ous bodily injury. In the event that an injection occurs, seek
medical attention immediately.
f
Be aware of possible hazards from the spray material.
Observe the information on drums/tanks/tins as well
as manufacturer information of the spray material, in-
cluding the request to wear personal protective equip-
ment.
The manufacturer's instructions are to be observed
in order to reduce the risk of fire as well as injuries caused
through toxins, carcinogens, etc.
f
Use only nozzles/nozzle inserts specified by the manu-
facturer. Never spray without the nozzle protection
mounted.
Use of a special nozzle insert with the corre-
sponding nozzle protection reduces the probability that a
high-pressure jet penetrates the skin and injects toxins in-
to the body.
f
Exercise caution when cleaning and changing nozzle in-
serts. If the nozzle insert should become clogged dur-
ing spraying, follow the manufacturer's instructions
for switching off the system and relieving the pressure
before removing the nozzle.
Fluids under high pressure
can penetrate the skin, inject toxins into the body and lead
to serious injury.
f
Keep the plug of the mains cord and the trigger switch
of the spray gun clear of paint and other fluids. Never
hold the cord by its connectors to support it.
Failure to
follow the instruction can lead to electric shock.
f
Supervise children.
This will ensure that children do not
play with the fine-spray system.
f
Children or persons that owing to their physical, senso-
ry or mental limitations or to their lack of experience or
knowledge, are not capable of securely operating the
fine-spray system, may only use this fine-spray system
under supervision or after having been instructed by a
responsible person.
Otherwise, there is danger of operat-
ing errors and injuries.
Products sold in GB only
: Your product is fitted with an
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Products sold in AUS and NZ only
: Use a residual current de-
vice (RCD) with a rated residual current of 30 mA or less.
Product Description and
Specifications
Read all safety warnings and all instruc-
tions.
Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Intended Use
The power tool is intended for atomising solvent-based and
water-dilutable paints, finishes, primers, clear finishes, auto-
motive finishes, staining sealers, wood sealer-preservatives,
plant protectives, oil and disinfection agents.
The power tool is not suitable for spraying dispersions and la-
tex paint, caustic solutions, acidic coating materials, coating
materials with granules or solids as well as spray and drip-im-
peding materials.
Product Features
The numbering of the components shown refers to the repre-
sentation of the power tool on the graphic pages.
1 Spray gun
2
Air cap
3
Union nut
4
Mark for SDS connection
5
Thumbwheel for spraying capacity
6
Hose port (spray gun)
7
Handle extension (only for 800 ml container)
8
Container for spray material, 800 ml
Container for spray material, 600 ml*
9
Trigger switch
10
Suction tube with container seal
green: for 800 ml container
white: for 600 ml container*
11
Nozzle
12
Nozzle seal
13 Air hose
14
SDS connector
15 Base unit
16
Control knob for On/Off and air-flow control
17
Set-down port for spray gun
18
Hose connection (base unit)
19
Handle
20
Accessory compartment
21
Air filter cover
22
Measuring cup
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
OBJ_BUCH-420-002.book Page 15 Tuesday, August 23, 2011 12:08 PM
