Bosch PFS 1000, Original Instructions Manual

Page: 18 / 303

18 | English
These kinds of spark sources can lead to combustion of
the surrounding environment.
u
Do not spray materials if it is not clear whether they
might be dangerous.
Unknown materials could create
hazardous conditions.
u
Do not spray boiling water. Spray only warm water
(max. 55 °C) which is free from chemical additives.
u
Wear additional personal protection equipment such
as appropriate protective gloves and a protective
mask or respirator when spraying or handling chemic-
als.
Wearing personal protection equipment appropriate
to the conditions reduces your exposure to hazardous
substances.
u
Take note of possible risks posed by the spray mater-
ial. Observe the markings on the container or the man-
ufacturer's information regarding the spray material,
including the instructions about using personal pro-
tective equipment.
You must comply with the manufac-
turer's instructions in order to reduce the risk of fire and
of injury caused by poison, carcinogens, etc.
u
Keep the mains plug and the spray system trigger
switch free from paint and other liquids. Never hold
the cable by its plug connection for support.
Doing this
could cause electric shock.
u
Supervise children. This will ensure that children do not
play with the fine spray system.
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
PFS 1000
The power tool is intended for spraying the following spray
materials: Solvent-based and water-dilutable (recommen-
ded) lacquers, glazes, primers, impregnations, clear lac-
quers, oils and water.
The power tool is not suitable for use with emulsion and latex
paints (wall paints), caustic solutions, wood stains, acidic
coating materials, disinfectants, pesticides, house paints,
spray material containing grains or solids, and spatter- and
drip-resistant materials.
PFS 2000
The power tool is intended for spraying all common paints:
Emulsion and latex paints (wall paints), solvent-based and
water-dilutable (recommended) lacquers, glazes, primers,
impregnations, clear lacquers (
ALL Paint), oils and water.
The power tool is not suitable for use with caustic solutions,
wood stains, acidic coating materials, disinfectants, pesti-
cides, house paints, spray material containing grains or
solids, and spatter- and drip-resistant materials.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Spray gun
(2) Air cap
(3) Cap nut
(4) Hose port (spray gun)
(5) Thumbwheel for spray material volume
(6) Trigger switch
(7) Container for spray material
(8) Spare container for spray material
a)
(9) Nozzle cap (grey: For "wood" application)
(10) Nozzle cap (white: For "wall" application)
(
PFS 2000 )
(11)
O-ring
(12) Gasket
(13) Suction tube
(14) Filling sieve ( PFS 2000 )
(15) Transfer bucket
b)
(16) Nozzle needle
(17) Container seal
(18) Ventilation hole
(19) Paint channel
(20) Air hose
(21)
Bayonet lock
(22) Base unit
(23)
On/off switch
(24) Carrying handle
(25) Carrying strap
(26) Air filter cover
(27) Hose port (base unit)
(28) Eyelet for carrying strap
1 609 92A 687 | (16.09.2021) Bosch Power Tools