4
| Operating instructions |
OBD 1110
|
en
|
OBD 1110
| Operating instructions |
5
en
577383 REV A | 10.2015
Bosch Automotive Service Solutions
577383 REV A | 10.2015
Bosch Automotive Service Solutions
•
Do not use the tool if internal
circuitry has been exposed
to moisture . Internal shorts
could cause a fire and dam-
age the vehicle or tool .
•
Always turn the ignition
key OFF when connecting
or disconnecting electrical
components unless other-
wise instructed .
•
Most vehicles are equipped
with airbags . Follow vehicle
service manual precautions .
Serious injury or death
could result from an unin-
tended deployment .
WARNING!
A vehicle airbag can
open for several min-
utes after the ignition
has been turned off .
•
Always follow vehicle manu-
facturer’s warnings, cautions,
and service procedures .
About the Tool
The tool allows you to retrieve
and erase / reset diagnostic data
from the vehicle control module .
The diagnostic data can be used
to help determine the cause of a
vehicle malfunction .
Use the tool to perform the fol-
lowing functions:
Codes / Data
Erase / Reset Retrieve
Confirmed Codes
Erase
•
Pending Codes
Erase
•
Permanent Codes
—
•
View Data
—
•
MIL Status
—
•
I / M Monitors
Reset
•
View Freeze Data
Erase
•
VIN (Vehicle Identifi-
cation Number)
—
•
Tool Parts
Part
Description
LCD
display
8 line by 21 character mono-
chrome backlit LCD .
READ
Performs the Read Codes func-
tion and scrolls back through
the screens . Press this key when
an up arrow (
#
) appears on the
display .
ERASE
Performs the Erase Codes func-
tion and scrolls forward through
the screens . Press this key when
a down arrow (
$
) appears on
the display .
ENTER
Selects displayed item .
BACK
Returns to the previous screen .
OBD II
Connector
Connects the tool to the vehicle
connector .
Icons
Icon
Description
$
Indicates additional informa-
tion is available on next screen
by using the
ERASE
key .
#
Indicates additional information
is available on previous screen
by using the
READ
key .
CONFIRMED
Confirmed codes are reported
when a component is indicat-
ing a malfunction is present .
PENDING
Pending codes are reported
when a problem occurs during
the current or last completed
drive cycle .
PERMANENT
Permanent codes are a special
type of confirmed code that
only the vehicle can erase .
x / y
Appears only when view-
ing codes . Indicates code se-
quence and quantity (code x
of y) . For example, “2 / 9” indi-
cates that the 2nd of 9 codes
reported by the computer mod-
ule is being viewed .
ABS $##
Mod $##
Appears only when viewing
codes . Indicates the computer
module that reported the code .
ABS will appear if the code is
an ABS code . Mod $## appears
when the code is a powertrain
code . The Mod $## is the name
assigned to the vehicle control
module reporting the code .
Indicates that the
READ
and
ERASE
hot keys are active
Connect the Tool
To connect the tool to the vehicle:
1 . Locate the OBD II connector
under the steering column . If
the connector is not there, a
label should be there indicat-
ing the whereabouts of the
connector . For more informa-
tion on OBD II connectors, go
to http://www .obdclearing-
house .com/oemdb .
2 . If necessary, remove the cover
from the vehicle connector .
3 . Turn the ignition switch to
the ON position . Do not start
the engine .
4 . Plug the OBDII connector
attached to the tool into the
vehicle connector .
The Tool automatically reads
Codes and displays the data .
When done viewing data,
press
ENTER
key to return
to Diagnostic Menu .
NOTICE
If the vehicle returns a
manufacturer specific
code, the tool will ask
if you wish to select
the vehicle and then
read ABS codes .
If the vehicle doesn’t
return a manufacturer
specific code, the tool
will ask if you wish
to select a vehicle to
read ABS codes . ABS
is not supported for
all vehicles .
Diagnostic Menu User
Interface
To select functions:
1 . From the Diagnostic Menu,
press the
READ
or
ERASE
arrow key until the desired
function is highlighted, then
press
ENTER
to retrieve and
display the results .
