Bosch OBD 100, Original Instructions Manual, Page: 4 / 20

4 | OBD 100 | Product description All you need to know about OBD | OBD 100 | 5
569624 Rev "A" 2013-12-19
|
Robert Bosch GmbH
en
3. Product description
3.1 Intended use
The OBD 100 reads and displays emission-
related diagnostic data via the OBD interface
of gasoline and diesel passenger vehicles. It is
also possible to erase or reset trouble codes
and to display additional electronic control unit
information. The diagnostic data can help to
establish the cause of problems in the vehicle.
!
The OBD 100 is only to be used with the
vehicle stationary. Use whilst driving is
prohibited.
3.2 Prerequisites
OBD interface (OBD-2 or EOBD) in the vehicle
to be tested (refer also to Section "4.1 What are
OBD, OBD II, OBD-2 and EOBD").
3.3 Scope of delivery
Designation Order number
OBD 100 diagnostic tester SP02000002
Original operating instructions 569624 Rev "A"
Tab. 1: Scope of delivery
3.4 Description of device
Fig. 1: OBD 100
1 OBD diagnostic connector
2 Button panel
3 LCD (two-line)
3.4.1 Button panel
Fig. 2: OBD 100 buttons
Button Function

READ R Scrolls down through the screen dis-
play when ↓ or ↕ appears on the
screen.
R Reading of electronic control unit diag-
nostic data (press and hold for 2 sec-
onds).

ERASE R Scrolls up through the screen display
when
↑
or ↕ appears on the screen.
R Erasing of trouble codes in electron-
ic control unit (press and hold for 3
seconds).
R Resetting of inspection and main-
tenance monitors in electronic con-
trol unit.
E R Go to function selected.
R Return to main menu.
Tab. 2: Buttons and their functions
3.4.2 OBD diagnostic connector
This connects the OBD 100 to the OBD
diagnostic socket in the vehicle.
3.5 Cleaning
!
Do not use abrasive cleaning agents and
coarse workshop cloths.
¶
The housing is only to be cleaned with a soft
cloth and neutral cleaning agents.