12 | OBD 100 | Operation
Decommissioning | OBD 100 | 13
569624 Rev "A"
2013-12-19
|
Robert Bosch GmbH
en
5.8
Freeze frame (data)
This provides an image of the operating and
ambient conditions at the moment in time at
which the trouble code was first generated.
Freeze frames are not stored and displayed for
all PIDs. A list of the PID numbers (parameter
IDs) supported by the OBD 100 is given in
Section 9.
1.
Switch on the ignition (position 2).
2.
Connect the OBD 100 to the vehicle
Data are read in.
3.
In the main menu select "5) Freeze Frame" with
READ or
ERASE and confirm with
E
.
Trouble codes are displayed
4.
Select the trouble code and confirm with
E
.
"
Freeze frame data are displayed.
i
Scroll through the corresponding freeze
frame data using
READ or
ERASE.
5.9
VIN (vehicle identification
number)
i
The VIN function is not supported by all
vehicles.
1.
Switch on the ignition (position 2).
2.
Connect the OBD 100 to the vehicle.
Data is read.
3.
In the main menu select "6) VIN" with
READ or
ERASE and confirm with
E
.
"
The vehicle identification number appears as a
moving message.
5.10 Faults
Fault
Remedy
LINK ERROR
During reading
Turn the ignition key to the OFF
position for 10 seconds; then
return to the ON position and
press the <
READ> button.
Make sure the ignition key is set
to ON (position 2) and not to
ACCESSORIES (position 1).
During erasing
Turn the ignition key to the
OFF position for 10 seconds;
then return to the ON position
and press one of the following
buttons with the ignition key set
to ON (position 2) and not to
ACCESSORIES (position 1):
R
Continue erasing operation
with
ERASE.
R
Cancel erasing operation with
READ (read codes again) or
E
(return to main menu).
A trouble code will appear again if
the cause of the problem has not
yet been rectified.
MIL status
If the MIL status is
ON
and the
warning light does not come on
with the engine running, there
is a problem in the circuit of
the malfunction indicator light.
It is then advisable to consult a
workshop.
Tab. 11: Faults