Bosch NKN 710 Series, Installation Manual

Page: 8 / 30

System overview
These camera kits are complete camera packages that include a camera and lens installed
inside a sturdy (IP66 proof) housing. A feed-through wall mount is also provided. All kits are
equipped with a heater, blower and a sunshield. The maximum camera/lens size (H x W x D)
for all models is 91 x 81 x 262 mm (3.6 x 3.2 x10.3 in).
The kits are available with a choice of input power supply (24 VAC / 230 VAC), and various
connection possibilities:
–
housings with feed-through fittings in rear and base for power and signal cabling
– housings with pre-wired cables through holes in base of housing
– housings with rear connectors for a 4-pin power connector and a BNC connector, plus an
optional feed through fitting (for ethernet and other cabling)
IP camera kits can use the PoE supply (if connected) to directly power the camera via the
Ethernet cable (this can be seen as a backup to the normal camera power connection from the
housing PCB).
Available models
The following models are available:
Model Housing input
voltage
Camera type Connection Pre-wired
VKC--xxx-50 230 VAC DINION AN 4000 Power and BNC
connectors No
VKN--xxx-50 230 VAC DINION AN 5000 Power and BNC
connectors No
VKC--xxx-20 24 VAC DINION AN 4000 Feed-through Yes (power and
video cable)
VKN--xxx-20 24 VAC DINION AN 5000 Feed-through Yes (power and
video cable)
NKN-xxxxx-10N 24 VAC DINION IP 7000 Power and BNC
connectors
M20 fitting (for
Ethernet cable) No
NKN-xxxxx-20N 24 VAC DINION IP 7000 Feed-through Yes (power
cable only)
3
3.1
8 en | System overview DINION Housing Kit
2014.11 | 1.0 | F.01U.309.609 Installation Manual Bosch Security Systems