background image

11

After-sales service

Our after-sales service is there for you if your appliance needs 
to be repaired. We will always find the right solution in order to 
avoid unnecessary visits from a service technician.

E number and FD number

To help speed up the process, please have your product 
number (E no.) and production number (FD no.) ready when 
you contact after-sales service. The nameplate containing these 
numbers is found on the underside of your cooker. To save 
time in the event of a fault, you can make a note of the numbers 
for your appliance and the after-sales service telephone 
number in the space below.

Note that, even within the guarantee period, you are 
responsible for service and repair costs in the case of improper 
use or misuse.

Please find the contact data of all countries in the enclosed 
customer service list.

To book an engineer visit and product advice

Trust the expertise of the manufacturer, and rest assured that 
the repair will be carried out by trained service technicians 
using original spare parts for your domestic appliance.

Warranty conditions

In the unlikely event that the appliance is damaged or does not 
meet your expectations in terms of quality, please inform us as 
soon as possible. For the warranty to be valid, the appliance 
must not have been tampered with, or used inappropriately.

The applicable warranty conditions are those set out by the 
company's representative office in the country of purchase. 
Detailed information is available from retail outlets. Proof of 
purchase must be presented to obtain the benefits of the 
warranty.

We reserve the right to introduce changes.

Packaging and equipment used

If your appliance has a crossed-out dustbin symbol 

)

 , please 

note the following.

Environmentally-friendly disposal

Dispose of packaging in an environmentally-friendly manner.

The packaging of your appliance has been manufactured using 
only the materials which are strictly necessary to guarantee 
efficient protection during transport. These materials are 100% 
recyclable, thus reducing the environmental impact. You can 
also contribute to caring for the environment by following the 
advice below:

Dispose of the packaging in the appropriate recycling bin.

Before you get rid of an old appliance, make sure you disable 
it. Contact your local authority to find out the address of your 
nearest recycling centre to dispose of your appliance.

Do not pour used oil down the sink. Collect it in a sealed 
container and take it to an appropriate collection point or, 
failing that, place it in the rubbish bin (it will end up in a 
controlled dump; this is probably not the best option, but it 
will avoid contaminating ground water)

Measures to be noted during transport

Secure all mobile parts on the appliance using an adhesive 
tape that can be removed without leaving any traces. Secure 
the top cover, if available, to the appliance sides using 
adhesive tape.

Keep the original appliance packaging. Only transport the 
appliance in the original packaging. Observe the transport 
arrows on the packaging.

If the original packaging is no longer available

pack the appliance in protective packaging to guarantee 
sufficient protection against any transport damage.

The appliance must be transported upright, with the hotplate 
and the burners facing upwards. Do not place any heavy 
objects on the appliance. 

E no.

 

FD no.

 

After

­

sales service

O

 

GB

0844 8928979 
Calls from a BT landline will be charged at up to 3 
pence per minute. A call set-up fee of up to 6 pence may 
apply.

IE

01450 2655

This appliance is labelled in accordance with European 
Directive 2012/19/EU concerning used electrical and 
electronic appliances (waste electrical and electronic 
equipment - WEEE). The guideline determines the 
framework for the return and recycling of used 
appliances as applicable throughout the EU.

Summary of Contents for NGU41.1DB

























Reviews: