20
en | Operation of IP Matrix using the IntuiKey
IP Matrix
F.01U.082.117 | V4.0 | 2008.12
Installation and Operating Manual
Bosch Security Systems
4.5
Starting and Exiting a Camera Tour
You can start and exit five different camera tours that are configured using IP Matrix. Different
camera images are displayed on the selected monitor in automatic rotation.
1.
Press the
Tour On
softkey. The
Tour On
function is displayed in the status display.
2.
Enter the number of the selected camera tour and press Enter to confirm the selection.
The camera tour is started and you see the first camera image on the monitor. In the
status display, a current camera tour is indicated by an arrow between the monitor and
camera numbers.
3.
Press the
Tour Off
softkey. The camera tour ends.
4.6
Softkeys
You can use the softkeys to select other functions. The function of a softkey depends on what
menu is currently active. The current function of a softkey is always displayed in the softkey
display.
The upper part of the softkey display always shows the following functions:
4.7
Alarm
If an alarm for a BVIP unit activates the alarm key of the Intuikey via Alarm Scripting, the alarm
key lights up red. You can acknowledge the current alarms individually by pressing the key.
When all alarms have been acknowledged, the key is no longer lit up.
Softkey
Function
Main Menu
Shows the function menu of IP Matrix in the lower part of the
softkey display.
Camera Menu
Shows the function menu of the active camera in the lower part
of the softkey display.
Logout
Ends the connection with IP Matrix.
Special
Functions
Shows the special functions menu in the lower part of the
softkey display.
i
NOTICE!
Depending on how IP Matrix is programmed, you can trigger further actions by pressing the
alarm key.
Summary of Contents for MVC-FIPM
Page 1: ...IP Matrix MVC FIPM en Installation and Operating Manual ...
Page 2: ......
Page 25: ......