Bosch MUZ6FW series, Operating Instructions Manual

Page: 7 / 23

Robert Bosch Hausgeräte GmbH 7
Securing the attachment
to the base unit

Place the appliance on its back
as indicated.

Open the locking lever (Fig.

–5).

Place the mincer attachment, with foot
pointing downwards, on the drive for the
bowl and throw the locking lever.

Firmly screw threaded ring.

Attach filling tray.

Insert pusher into the filling shaft.
Operating the appliance
Warning!
Do not process bones.

Place a bowl or plate under the outlet
opening.

Place the food to be processed
in the filling tray.

Use the pusher to push in ingredients.

Set rotary knob to setting 4.
After using the appliance

Switch off the appliance with the rotary
switch.

Remove mains plug.

Open the locking lever (Fig.

–5)
and remove the mincer by screwing
it off the appliance.

Disassemble the mincer attachment
(in reverse sequence to assembly).

Clean parts.
Cleaning and servicing
Warning!
Do not use abrasive cleaning agents.
Surfaces may be damaged.
Metal mincer parts are not dishwasher-proof.

Loosen threaded ring and disassemble
attachment.

Wash metal mincer parts by hand and
dry immediately.

Filling tray and pusher are dishwasher-
proof

Lubricate dried perforated disc and
blades with cooking oil to protect
against corrosion.
Optional accessories
(available from dealers)
Warning!
Always assemble the accessories without
blades and perforated discs.
Follow all instructions mentioned above
concerning “For your safety”, “After work”
or “Cleaning and servicing”.
Perforated disc sets
MUZ7LS2/LS3/LS4
Pasta attachments made of metal
MUZ7NV1
Fruit press attachment MUZ7FV1
Fig.

for pressing e.g. berries, tomatoes, apples,
pears, rosehips (cook rosehips for 1 hour
before pressing).
Extracted fruit pulp is especially suitable
for making jam.

Preparation as described for mincer
attachment. Note required individual
parts and sequence when assembling
the fruit press attachment.

First undo the fastening screw as far as is
required to allow the pulp to flow out while
still moist.

Then adjust the fastening screw until the
pulp flows out with the required moisture.

Place the food to be processed in the
filling tray.
Use the pusher to push in ingredients.

Set rotary knob to setting 4.
en
Risk of injury from rotating
tools/sharp blades!
While operating the appliance, never
reach into the filling shaft.
Work with the pusher only.
Change tools only when the drive
is at a standstill. Do not take hold
of blades by the cutting surfaces.
Risk of electric shock
Before working on the appliance, pull out
the mains plug.