Bosch MultiTalent MC812-G Series, Instruction Manual

Page: 17 / 64

17
Sample recipe for the universal cutter en
Note: The longer the appliance remains
switched on, the finer the ingredients will
be cut. With herbs the desired cutting
result may be achieved very quickly after
switching the appliance on. A brief “tap” on
setting M may be sufficient.
■ After processing, release the rotary
switch. Disconnect the mains plug.
After using the appliance
■ Rotate the universal cutter anti-
clockwise and remove.
■ Turn the universal cutter over, and the
chopped food will fall into the lid.
■ Hold the lid. Rotate the jug anti-
clockwise and remove.
■ Remove the rest of the chopped food
from the jug using a suitable implement
(e.g. spoon).
■ Clean all parts immediately after use.
X
“Cleaning and maintenance” see
page 17
Sample recipe for the
universal cutter
Honey and hazel nut spread
– 10 g hazelnuts
– 100 g honey (room temperature)
■ Put the nuts in the universal cutter jug
and grind for 5 seconds on setting M .
■ Add honey and process for 10 seconds
on setting M .
Note the recomended processing quantities
and times.
X
Fig.
M
Cleaning and maintenance
The appliance requires no maintenance.
Thorough cleaning will guarantee a long
service life.
General information
■ Clean all parts immediately after use.
This will prevent residues from drying
on and possibly attacking the plastic
(e.g. essential oils in herbs).
■ When processing food such as carrots
and red cabbage, plastic parts may
become discoloured. This can however be
removed with a few drops of cooking oil.
Caution!
– Do not use cleaning agents containing
alcohol or spirits.
– Do not use any sharp, pointed or metal
objects.
– Do not use abrasive cloths or cleaning
agents.
– Do not wedge plastic parts in the
dishwasher as they could become
permanently deformed.
W Risk of injury!
– Take care when handling sharp cutting
blades.
– Grasp the universal blade by the edge
of the plastic handle only.
– Grasp the cutting discs by the edge
only.
– Never grasp the sharp blades or edges
of the dicer insert. Grasp the slicing disc
by the plastic stud in the centre only.
– Do not touch the blender blades and
universal cutter blades with bare hands.
– Use a brush to clean the blades and
cutting discs.
W Risk of electric shock!
Unplug the appliance before cleaning it.
Cleaning the base unit
■ Never immerse the base unit in liquids
or hold under running water and do not
clean in the dishwasher. Do not steam-
clean the appliance.
■ Wipe the base unit with a damp cloth.
If required, use a little detergent.
■ Then dry the base unit.
Cleaning the bowl, tools and
accessories
■ It is recommended rinsing all parts
under running water immediately after
use.
■ Take accessories apart before cleaning.
Do this in reverse order as described in
the individual chapters.