Robert Bosch Hausgeräte GmbH
5
en
In general, the turbo speed is
recommended for processing food. For
liquids, hot foodstuffs and for mixing
together solids and liquids (e.g. muesli
into yoghurt), it is advisable to use the
speed control.
The current speed is shown in the
speed display when the On/Off button is
activated. The more segments that light
up, the higher the set speed.
•
Hold the blender and beaker fi rmly.
•
Switch on the blender by pressing the
required On/Off button.
The blender remains switched on for
as long as the On/Off button is
pressed.
To prevent the mixing products from
spraying out, do not press the On/Off
button until the mixer foot is
immersed in the food to be mixed.
Always switch off the blender before
extracting it from the mixed food.
•
When you have fi nished processing the
food, release the On/Off button.
•
Unplug the mains plug.
• Press the release buttons and remove
the mixer foot from the basic unit.
Multi-function accessory with tools
Risk of injury due to sharp blade/
rotating drive
Never insert fi ngers into the bowl during
operation. Always use the pusher (13) to
push ingredients into the beaker.
The drive continues to run for a short
time after the blender is switched off. Do
not change the tool until the drive has
come to a complete stop.
When working with the multi-function
accessory, the appliance can only be
switched on if the drive unit is screwed
tightly in place.
Important:
Only fi t and remove the basic unit to/
from the drive unit of the multi-function
accessory when the appliance has come
to a complete stop.
Universal blade (14)
For chopping meat, hard cheese, onions,
herbs, garlic, fruit, vegetables, nuts,
and almonds. It is important to note the
maximum quantities in the table (
Fig. G
).
Risk of injury due to sharp blade.
Never touch the blade in the bowl.
Do not clean the universal blade using
bare hands. Always use a brush.
Only handle the universal blade by the
plastic part.
Caution:
Before chopping meat, ensure that
all gristle, bones and tendons have been
removed. The multi-function accessory
is not suitable for chopping very hard
materials (e.g. coffee beans, radishes,
nutmeg) or frozen food (e.g. fruit).
Preparation
Fig. C
•
Place the bowl on a smooth, clean work
surface and press down.
•
Insert the blade.
•
Place the food in the bowl.
•
Place the drive unit on the bowl with the
pusher inserted (align arrow
a
on the
drive unit with any catch
b
on the bowl)
and turn in an anti-clockwise direction
until it clicks into place.
If the bowl contains larger quantities
of ingredients, it may be diffi cult to fi t
the drive cover. If required, twist the
three-winged coupling on the
underside of the drive unit into the
correct position.
When locking the drive cover in
place, ensure that the shaft of the
cutting knife is sitting vertically in the
beaker (see picture C-4b).
•
Place the basic unit on the drive unit and
allow to click into place.
Ensure that the appliance audibly
engages into position on the drive
insert. Otherwise, the appliance
coupling may be seriously damaged.
•
Plug in the mains plug.
Downloaded from www.vandenborre.be
Summary of Contents for MSM7800AU
