Bosch MSM019A, Datasheet

Page: 16 / 64

3.10 Certifications
Declaration of conformity Declaration of conformity (see chapter 12 "Appendix" on page 55 ) confirm
that the components comply with the valid EN standards and EC Directives.
MSM motors
CE-Conformity regarding
EN 60034-1: Rotating electrical machines - Part 1: Rating and performance:
Rating and performance behavior (Edition 2010 + Cor.:2010 (2010, modi‐
fied))
EN 60034-5: Rotating electrical machines - Part 5: Degrees of protection pro‐
vided by integral design of rotating electrical machines (IP-Code) - Classifica‐
tion (Edition 2001 + A1:2007 (2000 + Corrigendum 2001 + A1:2006))
C-UR-US-Listing The motors are listed by UL ("Underwriters Laboratories Inc.®"). A proof of
certification can be found in the Internet via http://www.ul.com under "Certifi‐
cations" by entering the file number or the "Company Name: Rexroth".
MSM motors
Company Name:
BOSCH REXROTH ELECTRIC DRIVES & CONTROLS GMBH
Category Name:
Servo and Stepper Motors Components
For file numbers, standards refer to table “Technical data”
Wiring material UL (ready-made cables of Rexroth)
Only use copper lines of class 6 (or equivalent) with minimal al‐
lowed wire temperature of 75 °C in the scope of application of
CSA / UL for wiring the components.
Allowed degree of contamination
Please observe the allowed pollution degree of the components
(see"Ambient and application conditions").
Bosch Rexroth AG DOK-MOTOR*-MSM********-DA05-EN-P 14/61
Synchronous Servomotors MSM
Operating conditions