Bosch MSK030B NSNN Series Project Planning Manual Download Page 160

Page: 160 / 178

14.2

Operation

During operation, ensure that the ambient conditions described are observed

(see

chapter 10 "Operating conditions and application notes" on page 115

14.3

Shutdown

In the event of malfunctions, maintenance measures or shutting down the

motors, please proceed as follows:

1. Follow the instructions in the machine documentation.
2. Use the machine-side control commands to decelerate the drive to a

controlled standstill.

3. Switch off the power and control voltage of the control unit.
4. Only for motors with fan unit: Switch off the motor protection switch for

the fan unit.

5. Switch off the main switch of the machine.
6. Secure the machine against unpredictable movements and against op‐

eration by unauthorized persons.

7. Wait until the discharging time of the electrical systems has elapsed and

then disconnect all electrical connections.

8. Before disassembling the motor and, if applicable, the fan unit, secure

them against dropping or moving and afterwards, disconnect the me‐

chanical connections.

Bosch Rexroth AG

DOK-MOTOR*-MSK*EXGIIK3-PR09-EN-P

158/175

Synchronous Servomotors MSK For Potentially Explosive Areas

Commissioning, operation and maintenance

Summary of Contents for MSK030B NSNN Series



















































































































































































Search results

Summary of Contents for MSK030B NSNN Series

Reviews:

Bosch MSK030B NSNN Series, Project Planning Manual, Page: 160 / 178

Search results

Summary of Contents for MSK030B NSNN Series

Reviews: