Bosch MSK030B-0900-NN Project Planning Manual Download

Page: 182 / 282

The torques specified in the motor characteristics must be re‐

duced by approx. 20-30% when attaching transmissions.

Observe all other notes and requirements in the documentation for the trans‐

missions used.

7.2

Fan units for MSK motors

7.2.1

Fan units area of application

MSK motors from size 060 can be equipped with fan units. The LEM fan units

can be ordered as accessory kits. For certain motors, the fan units can be

supplied assembled ex works. Fan units are intended for an attachment to

motors in applications with high repetition frequencies or continuous opera‐

tion.

Damage to property due to improper applica‐

tion of motors with fan units

NOTICE

Motors with mounted fan units are not suited for applications with continuous

shock load, e.g. pressing, squeezing, chargers, ...
In such a case, use motors with bigger performance without fan units .

The following designs are available.

Axial

For applications requiring the slimmest

possible design.

Radial

For applications requiring the shortest pos‐

sible design.

Bosch Rexroth AG

DOK-MOTOR*-MSK********-PR12-EN-P

180/279

Synchronous Servomotors MSK

Accessories

Summary of Contents for MSK030B-0900-NN



























































































































































































































































































Search results

Summary of Contents for MSK030B-0900-NN

Reviews:

Related manuals for MSK030B-0900-NN

Brands by name

Popular brands

Bosch MSK030B-0900-NN, Project Planning Manual

Search results

Summary of Contents for MSK030B-0900-NN

Reviews:

Related manuals for MSK030B-0900-NN

Brands by name

Popular brands