Bosch MMB6382M, User Manual, Page: 35 / 320

Basic operation
en
35
7.3 Using the blender to pro-
cess food
WARNING
Risk of injury!
Improper use may cause injuries.
▶
Only use the appliance once it is
fully assembled.
1.
Prepare the food.
For example, cut large items of
food into pieces.
2.
Check the seal on the EasyClick
blade insert. If a seal has been re-
moved, reinsert it correctly.
→ Fig.
3
Note:
The seal remains on the
EasyClick blade insert for cleaning.
If the seal is damaged or not cor-
rectly positioned, liquid may run
out.
a The seal is seated in the groove.
a
The sealing lips point in the direc-
tion of the blender jug.
a
The smooth sealing surface lies
against the EasyClick blade insert.
3.
Turn the blender jug upside down.
4.
Open the retaining bracket.
→ Fig.
4
5.
Align the EasyClick blade insert
with the tap in the blender jug.
6.
Push the EasyClick blade insert
into the blender jug and close the
retaining bracket until it clicks into
place.
→ Fig.
4
7.
Set the rotary switch to ⁠.
8.
Place the blender jug onto the
main unit and rotate in a clockwise
direction until it locks into place.
→ Fig.
5
9.
Add the food to the blender jug.
→ Fig.
6
Observe the minimum and max-
imum processing quantities.
→
"Overview of recipes", Page 39
10.
Insert the measuring jug in the lid
and place the lid on the blender
jug.
→ Fig.
7
The and markings must
match up.
11.
Turn the lid in the direction until
it clicks into place.
→ Fig.
8
The lid must be completely closed.
a
The colour of the lock indicator for
the lid changes from red to green.
12.
Insert mains plug.
13.
Set the rotary switch to ⁠.
→ Fig.
9
a
The status display (LED) on the
rotary switch lights up.
14.
Set the rotary switch to the recom-
mended speed.
→ Fig.
10
15.
Process the ingredients until you
achieve the required result.
16.
To end the operation, set the rotary
switch to ⁠.
7.4 Using instantaneous
switching
1.
Set the rotary switch to and
hold it there.
→ Fig.
11
a The ingredients are processed at
maximum speed.
2.
Release the rotary switch.
a
The rotary switch jumps to ⁠.
a
Processing stops.
7.5 Using programmes
Requirements
¡
The blade insert is installed.
¡
The blender jug has been attached
and locked.
¡
The blender jug is filled with the
food or ice cubes.
¡
The lid is attached and locked.
¡
The rotary switch is set to ⁠.