Bosch MIC Series 400 Installation And Operation Manual Download | Manualshive

Page: 7 / 78

background image

MIC400 Series Camera | Installation and Operation Manual

AAA

EN

| 7

Bosch Security Systems

Issue 1

MIC400 Camera Versions and Options

MIC400 Camera Versions

This manual covers the installation & operation of the following MIC400 series PTZ
cameras, briefly described below:-

MIC400AL

The MIC400AL is made from machined and cast aluminium and is

then pre-treated and painted with two part epoxy power coat paint in either
RAL7001 (Grey) or RAL9005 (Jet Black). This is the basic MIC model and is
available with optional wipers, heaters, 8-input alarm card and washer pump kit.

MIC400IR

This is the MIC400AL camera fitted with powerful twin IR lamps

that illuminate to 55M. Available options include the wiper and washer pump kit.
The MIC-IR power supplies feature a built in washer pump drive function and 4
alarm inputs as standard, heaters cannot be fitted to the MIC400IR.

MIC400PA

The MIC400AL camera is fitted with twin PA speakers that can be

used for public address applications. Available options include the wiper, 8-input
alarm card and washer pump kit; heaters cannot be fitted to the MIC400PA.

MIC400UL

The MIC400UL is fitted with special seals to allow continual

submersion in water to a depth of 30m. Available options include heaters and the 8
input alarm card. A wiper cannot be fitted to the MIC400UL.

MIC400ST

The MIC400 is also available in machined 316 Stainless Steel for

additional strength and corrosion resistance. Available options include a wiper,
heaters, 8 input alarm card and washer pump kit.

MIC400UT

The MIC400UT is fitted with special seals to allow continual

submersion in water to a depth of 25m with enhanced corrosion resistance.
Available options include heaters and the 8 input alarm card. A wiper cannot be
fitted to the MIC400UT.

MIC400 Power Supply Unit Versions and Options

BOSCH Group has designed a range of power supplies for the MIC400 cameras to
cater for a variety of common voltages and provide all the connections needed for
power, telemetry and video. The power supply units and options are detailed
below.

For cameras without IR lamps only:-

MIC-240PSU

240Vac input Power Supply Unit

MIC-115PSU

115Vac input Power Supply Unit

MIC-24PSU

24Vac Input Power Supply Unit

MIC-12PSU

12Vdc Input Power Supply Unit for vehicle installation

For MIC400IR cameras only:-

MIC-IR-240PSU

240Vac input Power Supply Unit

MIC-IR-115PSU

115Vac input Power Supply Unit

MIC-IR-12PSU

12Vdc input Power Supply Unit for vehicle installation

CAUTION

: Do not use IR power supplies with non IR cameras,

or damage to the MIC400 unit will occur.

«
...
5
6
7
8
9
...
»

Summary of Contents for MIC Series 400















































































Reviews:

No comments

Related manuals for MIC Series 400

Brand: Bacharach Pages: 24

Brand: Zavio Pages: 16

Brand: i-PRO Pages: 17

Brand: ACTi Pages: 25

Brand: HuddleCamHD Pages: 18

Brand: Bose Sicilia Pages: 24

Brand: Q-See Pages: 20

Brand: Olympus Pages: 202

Brand: Dahua Pages: 29

Brand: Edimax Pages: 137

Brand: Lilin Pages: 18

Brand: Digitrax Pages: 9

Brand: Gardsman Pages: 55

DirectIP DC-S6261X

Brand: Idis Pages: 20

Brand: HIKVISION Pages: 68

Brand: Idis Pages: 20

Brand: Videology Pages: 6

Brand: Speco Pages: 22

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands