22
en | Mounting
MIC IP starlight 7000i
2019-11 | 2.1 |
Installation Manual
Bosch Security Systems
Route cables through the bottom of the SCA (to prevent water from running into the side or
top of the SCA along the cables).
Surface Mount
Figure
5.6: Direct surface mount – camera upright (MIC + base gasket)
Figure
5.7: Direct surface mount – camera inverted (MIC + base IP67 Weatherization/Connector
Kit)
5.4
Considerations for Mounting the Camera in Inverted
Orientation
To change the camera orientation to “Inverted,” complete the following steps:
1.
Remove the camera from the shipping box.
2.
Apply power to the camera.
3.
Access the web browser of the camera.
4.
Access the page Configuration.
5.
Navigate to Camera > Installer Menu > Orientation.
6.
Select “Inverted.”
The camera head will rotate automatically into inverted position (180°).
Note the position of the visor when the camera is installed in inverted orientation. The visor
will now be near the body of the camera.
Summary of Contents for MIC IP starlight 7000i
