20
en | Maintenance
MIC IP fusion 9000 HD
2019-11 | 1.1 |
Installation Manual
Bosch Security Systems
5
Maintenance
Regular maintenance of your MIC camera will preserve the MIC, especially the surface finish,
for an extended period.
Cleaning
– Remove power from the device before cleaning. Generally, using a dry cloth for
cleaning is sufficient, but a moist, fluff-free cloth may also be used. Do not use liquid cleaners
or aerosol cleaners.
In corrosive environments, you should clean the camera surface periodically with fresh water.
4
Wash the camera thoroughly with fresh water:
–
Regularly (1-2 times per quarter, or more frequently if possible)
–
Immediately after an event such as a sea storm that could introduce a layer salt on the
camera’s surface
Use a flow rate of 150-145 liter/minute. Hold the nozzle a minimum distance of 1 m from the
camera.
4
In certain use cases, it might help to use a solution of hydrophobic liquid to prevent long-
term buildup of salt layers on the camera’s surface.
Note: Do not use water pressure greater than 96.5 kPa (14 psi) to wash the unit.
No User-serviceable Parts
Except for the external wiper blade, the device contains no user-serviceable parts. Contact
your local Bosch service center for device maintenance and repair. In the event of failure, the
device should be removed from site for repair.
On-Site Inspection
It is recommended that the device be inspected on-site every six months to check mounting
bolts for tightness, security, and any signs of physical damage. Inspection of this device shall
only be carried out by suitably-trained personnel in accordance with the applicable code of
practice (for example, EN 60097-17).
The following sticker appears on each side of the MIC camera head, just above the tilt arms, to
warn that the surface may be hot:
