Configuration of MIC IP 7000 HD – VIDEOJET decoder 3000 – for integration with analog CCTV
|
19
/18
Bosch Security Systems
Version 1.3 | September 2015
It is also possible to connect a Pelco standalone keyboard KBD300 directly to the decoder serial port
interface. The port connections shown apply in this configuration too.
Make sure that the dip switch in the rear panel of the keyboard corresponds with the Direct P Mode
or Direct D Mode. As an example, when using Pelco D protocol you have to set the serial communi-
cation parameters as indicated for the Direct D mode in the picture and the dip switch in the
key-board as follows: switch 1-4 up, switch 5-7 down and switch 8 up.
4.5.4 Integration with SYNECTICS EX250 system and VIDEOJET decoder 3000:
The SYNECTICS EX 250 system supports the Forward Vision protocol for controlling the telemetry
features of the analog MIC camera family. Using the VIDEOJET decoder 3000 series, the MIC IP 7000
HD family can be integrated into an existing EX250 (or equivalent system) using the Forward Vision
protocol.
Figure 21: Interface between SYNECTICS controller and VIDEOJET decoder 3000.
For specific menu option for SYNECTICS products, please refer to the manufacturer’s installation
manuals.
