Bosch MFW22010, Operating Instructions Manual

Page: 4 / 44

4 Robert Bosch Hausgeräte GmbH
Do not use the appliance if the power cord and/or appliance
are damaged.
Always disconnect the appliance from the supply if it is left unattended
and before assembling, disassembling or cleaning.
Do not place the power cord over sharp edges or hot surfaces.
To prevent injury, a damaged power cord must be replaced by the
manufacturer or his customer service or a similarly qualified person.
Only our customer service may repair the appliance.
,
Safety instructions for this appliance
Risk of injury!
Risk of electric shock!
Never immerse the base unit in liquids and do not clean in the dish-
washer. Do not use a steam cleaner.
Do not insert mains plug until all preparations for working with
the appliance are complete.
After a power failure the switched-on appliance starts up again.
Before cleaning the appliance, pull out the mains plug.
Before fitting/removing attachments, wait until the drive has come
to a standstill and pull out the mains plug.
Risk of injury from sharp blades/rotating drive!
Keep hands clear of rotating parts. Do not reach into the feed tube.
Always use the stuffer to push food down the hole.
Warning!
Do not expose appliance to temperatures above 60°C.
Overview
Please fold out the illustrated pages.
Fig.

1 Mincer
2 Drive
3 Mincer attachment
4 Filler tray
5 Pusher
6 Release button
7 Control button
I = Appliance switched on
0 = Appliance switched off
Mincer attachment
8 Housing
9 Worm gear with driver
10 Double-sided blade
11 Perforated disc
a) medium, hole diameter 4 mm
c) coarse, hole diameter 8 mm
12 Threaded ring
Sausage filler attachment
13 Nozzle
14 Bearing ring
Predetermined breaking point
To prevent serious damage to your appliance
if the mincer is overloaded, the driver has
a notch on the worm gear (predetermined
breaking point). If an overload occurs,
the driver breaks instead. A spare part for
the drive element is included in delivery
and can easily be replaced.

To do this, loosen the screw and remove
the damaged driver (Fig.

).

Attach the new driver with the screw.
Otherwise spare parts with a predetermined
breaking point are not a component
of our warranty obligations. Such spare parts
can be purchased from customer service
(order no. 630701).
en