
8
Troubleshooting
en
6.
As soon as the desired consistency is
achieved, set the switch to
0
and wait
for the appliance to come to a standstill.
7.
Pull out the mains plug.
8.
Release and remove the tools by
pressing the ejector button. The ejector
button cannot be actuated unless the
switch is in the
0
position.
Troubleshooting
Switch cannot be moved to levels
1
to
5
.
Solution:
When the rear aperture is open, the
selector switch will not function between
levels
1
and
5
.
Cleaning
The appliance and the accessories used
must be thoroughly cleaned after each use.
X
Table
D
W
Risk of electric shock!
Disconnect the mains plug before
cleaning.
Warning!
■
Do not use cleaning agents containing
alcohol or spirits.
■
Do not use sharp, pointed or metal
objects.
■
Do not use abrasive cloths or cleaning
agents.
■
Clean
the base unit
with a soft, damp
cloth and then rub dry.
X
Fig.
E
■
The power cord can be wound up for
storage of the appliance.
■
Secure the mains plug with the cable
clip.
Note:
Appliances with a spiral cord: Never wind
the cord around the appliance!
X
Fig.
F
Disposal
J
Dispose of packaging in an environ
mentallyfriendly manner. This
appliance is labelled in accordance
with European Directive 2012/19/EU
concerning used electrical and
electronic appliances (waste electrical
and electronic equipment – WEEE).
The guideline determines the frame
work for the return and recycling
of used appliances as applicable
throughout the EU. Please ask your
specialist retailer about current
disposal facilities.
Guarantee
The guarantee conditions for this appliance
are as defined by our representative in the
country in which it is sold. Details regarding
these conditions can be obtained from
the dealer from whom the appliance was
purchased. The bill of sale or receipt must
be produced when making any claim under
the terms of this guarantee.
Changes reserved.
Summary of Contents for MFQ4 GB Series
Page 2: ...10 11 12 9 8 7 1 2 3 5 4 6 A ...
Page 3: ...B 1 4 5 6 7 8 2 3 a b ...
Page 26: ...6 ...
Page 27: ...6 ...