MBE Mounts and Adapters
Attaching Cameras to the Brackets | en
17
Bosch Security Systems, Inc.
Installation Guide
| 3.0 | 2011.10
6.
Route the applicable wires to the EX27 camera. Remove
any of the hole plugs (item 4) to facilitate cable
management.
7.
Refer to the
EX27/EX27N/EX27D Installation Manual
to
configure and to use the camera.
5.2
Attaching a REG-D1/L1 to an MBE-28
The REG-D1 and REG-L1 License Plate Capture Cameras are
designed and configured to capture images of license plates
under a wide range of ambient light and weather conditions.
Refer to the
REG-D1 Installation Instructions
or to the
REG-L1
Installation Instructions
, both located on the Bosch Security
System Web site, for complete camera details.
NOTICE!
Select a suitable location that protects the camera from
accidental damage, tampering, and environmental conditions
that exceed the camera’s specifications.
CAUTION!
The selected mounting location should not place the camera in
a situation where its environmental specifications could be
exceeded.
Ensure the selected location is protected from falling objects,
accidental contact with moving objects, and unintentional
interference from personnel. Follow all applicable building
codes.
Summary of Contents for MBE Series
Page 1: ...MBE Mounts and Adapters MBE Series en Installation Guide ...
Page 2: ......
Page 25: ......
