Bosch MAP Control Center IUI-MAP0001-2 User Manual Download Page 16

Page: 16 / 64

en | Operation

MAP Control Center

2014.11 | 06 | F.01U.168.328

User Manual

Bosch Sicherheitssysteme, GmbH

2.4

Disarm – Using the Control Center

The

Disarm

menu allows the user to disarm all areas, disarm selected areas, or disarm the

entire control panel (or installation-specific local) area. On the

Main Menu

(

Figure 1.5 Main

Menu – screen 1, page 8

), press

Disarm

, then select a disarming option from the on-screen

buttons on the

Disarm

menu (

Figure 2.9 Disarm menu, page 16

Figure 2.9

Disarm menu

2.4.1

Disarm All Areas

From the

Disarm

menu (

Figure 2.9 Disarm menu, page 16

), press the

Disarm All Areas

button. The control center display shows the message: Attention - All

authorized areas are

disarmed

(

Figure 2.10 Attention message: All authorized areas are disarmed, page 16

). Then the

Disarm

menu opens with the lock button in the unlocked position and the disarmed status

showing on

the Disarm All Areas

button.

Figure 2.10

Attention message: All authorized areas are disarmed

2.4.2

Disarm Selected Areas

From the

Disarm

menu, press the

Disarm Selected Areas

button. The

Disarm Selected Areas

screen (

Figure 2.11 Disarm Selected Areas screen, page 17

) opens. The text and the lock

button show status information on the button for each area. To disarm an area, press the
button for an area that is not already disarmed; then press the

Disarm

button. To sort the list

of areas before selecting some to disarm, press the

Sort/Filter

button.

Summary of Contents for MAP Control Center IUI-MAP0001-2

































































Search results

Summary of Contents for MAP Control Center IUI-MAP0001-2

Reviews:

Brands by name

Popular brands

Bosch MAP Control Center IUI-MAP0001-2, User Manual

Search results

Summary of Contents for MAP Control Center IUI-MAP0001-2

Reviews:

Brands by name

Popular brands