Bosch MAP Control Center IUI-MAP0001-2 User Manual Download Page 8

Page: 8 / 64

en | System Overview

MAP Control Center

2014.11 | 06 | F.01U.168.328

User Manual

Bosch Sicherheitssysteme, GmbH

1.8

Screen Elements

Figure 1.5 Main Menu – screen 1

Screen name:

identifies the active screen.

Menu buttons:

Press a menu button to perform a task

Installer Mode Icon:

Indicates that the control panel is in installer mode.

RPS Connected Icon:

Indicates that RPS is connected to the control panel.

Information button:

If it is flashing, press this button to view additional system

information and to clear the events, alarms or troubles. For more Event Memory
information, refer to Section

View Event Memory, page 10

–

If the

Information

button is flashing red, there are system events and alarms that the

user has not cleared.

–

If the

Information

button is flashing yellow, there are system troubles which the user

has not cleared.

–

If the

Information

button is green, no additional system information is available.

Navigation bar:

Press the buttons in the navigation bar to find tasks or to view system

information. Refer to

Table 1.1 Navigation Bar description, page 9

. Buttons in the

navigation bar that appear without their normal colors are not activated.

Summary of Contents for MAP Control Center IUI-MAP0001-2

































































Search results

Summary of Contents for MAP Control Center IUI-MAP0001-2

Reviews:

Brands by name

Popular brands

Bosch MAP Control Center IUI-MAP0001-2, User Manual

Search results

Summary of Contents for MAP Control Center IUI-MAP0001-2

Reviews:

Brands by name

Popular brands