44
en | Operation
LE10 Radio Receiver
F.01U.139.675 | V1.3 | 2013.05
User Manual
Bosch Security Systems
When a S37E transmitter is detected:
–
LED 2 lights up permanently red for 30 seconds.
–
Relay 1 stays off for 30 seconds.
–
Relay 2 switches on for 25 seconds.
During these 30 seconds, all radio reception is fully blocked.
This allows a person wearing the S37E to cross the monitored
area without generating an accompany signal.
6.3.3
Detection of a S37L Wristband Transmitter with a
S37E Wristband Transmitter nearby
Device behavior
–
LED 1 stays permanently green.
When a S37L transmitter and a S37E transmitter are detected
by the monitored area:
–
LED 2 lights up permanently red.
–
Relay 1 switches on until the S37E transmitter is detected.
–
1 second after Relay 1, Relay 2 switches on for 3 seconds.
When the S37E transmitter sends its signal (approx. 4 seconds
after the S37L):
–
LED 2 lights up permanently red for 30 seconds.
–
Relay 1 switches off for 30 seconds.
–
Relay 2 stays on for another 25 seconds.
After the detection of the S37E transmitter, all radio reception
is fully blocked during 30 seconds. This allows a person wearing
the S37E transmitter to accompany a person wearing the S37L
transmitter through the monitored area without generating an
accompany signal.
6.4
Dementia with Accompany (mode 4)
6.4.1
Activation of a S37L Wristband Transmitter
Device behavior
–
LED 1 stays permanently green.
When a S37L transmitter is activated, a 10-second time slot
starts.
If, during these 10 seconds, a S37E transmitter is detected:
–
There is no change of the LEDs and the relays.
