Bosch Automotive Diagnostics Equipment (Shenzhen) Limited
18|���|���systemsettings
en
8.�
���
The VCI include VCI communication settings, VCI infor-
mation, and VCI selfcheck.
8.�.1
����ommunicationSettings
The VCI communication port settings include the USB
settings, LAN settings, and WLAN settings.
8.�.1.1 USBSettings
When the VCI is normally connected with the computer,
the system will automatically match with the available
serial port list.
Operation Steps:
1.
Select a serial port name, and click the “Automatic
Connection Test” button to test the available serial
port;
2.
After the test is completed, the system will automati-
cally prompt whether to save the settings;
3.
Click the “Yes” button to save the successful seri-
al port and the result will be displayed in the test
result display box.
8.�.1.2 LANSettings
The LAN settings include the P2P mode and the route
mode.
Operation Steps for P2P Mode:
1.
Select the P2P mode;
2.
Enter the relevant information;
3.
Click the “Automatic Connection Test” button and
wait for the test completion;
4.
After the test, the test result will be displayed in the
result display box.
Operation Steps for Route Mode:
1.
Select the route mode;
2.
Enter the relevant information;
3.
Click the “Automatic Connection Test” button and
wait for the test completion;
4.
After the test, the test result will be displayed in the
result display box.
8.�.1.� WLANSettings
The wireless network settings include the P2P mode
and the route mode.
Please ensure WLAN normally connected of computer.
Operation Steps for P2P mode:
1.
Select the P2P mode;
2.
Click the “Scan Network” button to search the availa-
ble wireless network;
3.
Select the available wireless network, click the “OK”
button, and the interface will display the information
concerning all networks connected with the VCI;
4.
Click the “Automatic Connection Test” button and
wait for the test completion;
5.
After the test, the test result will be displayed in the
result display box.
Operation Steps for Route Mode:
1.
Select the route mode;
2.
Click the “Scan Network” button to search the availa-
ble wireless network;
3.
Select the available wireless network, click the “OK”
button, and the interface will display the information
concerning all networks connected with the VCI;
4.
Click the “Automatic Connection Test” button and
wait for the test completion;
5.
After the test, the test result will be displayed in the
result display box.
8.�.2
����nformation
The VCI information include the serial number and firm-
ware (VCI) software version; after the VCI is normally
connected with the computer, the system will start the
automatic detection.
8.�.�
���Selfcheck
This function is used to detect whether the VCI is nor-
mal.
Operation Steps:
1.
Ensure normally connection between the VCI and the
computer;
2.
Click the “Start Selfcheck” button and wait for the
selfcheck completion and detection result display.
i
When VCI selfcheck, ensure disconnection between
VCI and diagnostic cable.
