Bosch Automotive Diagnostics Equipment (Shenzhen) Limited
14|���|�ntroductionto���host
en
6.
Equipment connection
According to different functions, the connection modes
are: including diagnostic connection, selfcheck connec-
tion and firmware upgrade connection.
6.1
Diagnosticconnection
Before using the equipment, please ensure the normal
connection among the VCI, computer, and on-board
ECU. The main connection modes are: including the
USB port connection, network port connection and
wireless connection. If all connected, the USB port con-
nection is preferential.
1
2
3
4
11
10
5
9
6
7
8
VCI003
Fig. 3:
Diagnostic connection
1. Interface on car
2. Connector
3. Diagnostic extension cable
4. Power extension lead
5. Record cable
6. VCI host
7. Computer
8. LAN cable
9. USB cable
10. Alligator clip
11. Cigarette igniter connector
5.
Introduction to VCI host
5.1
Hostidentifications
Identifi-
cation
Description
The power indicator lamp, lighting in green to indi-
cate the normal power supply;
The computer communication indicator lamp, ligh-
ting in green to indicate the wired connection or in
yellow to indicate the wireless connection;
The malfunction indicator lamp, lighting in red to in-
dicate the VCI malfunction;
The ECU communication indicator lamp, lighting in
green to indicate the CAN communication mode or
in yellow to indicate other communication modes;
The travel recorder button identification, used for
your convenient and rapid operation.
5.2
Diagnosisport
DIAG
1
2
3
VCI001
Fig. 1:
Diagnosis Port
1. Data record interface
2. Diagnosis interface
3. Power interface
5.�
�onnectionPort
1
2
VCI002
USB
Fig. 2:
Connection port
1. USB communication interface
2. Network communication interface
