Bosch KGE36AW30, Installation Instructions Manual

Page: 10 / 51

en
10
Changing over
the door hinges
(if required)
We recommend that you have the door
hinges changed over by our customer
service. You can find out the costs for
changing over the door hinges from your
appropriate customer service.
ã=
Warning
While changing over the door hinges,
ensure that the appliance is not
connected to the power supply. Pull out
the mains plug beforehand. To prevent
damaging the back of the appliance,
place adequate padding underneath.
Carefully place the appliance on its back.
Installation in numerical sequence.
Fig. 1
Note
If the appliance is placed on its back,
ensure that the wall spacer is not fitted.
Changing the door
handle
(if required)
Installation in numerical sequence.
Attached handle
Fig. 2
Internal handle
Fig. 3
Fitting the wall spacer
Fit wall spacers to obtain the indicated
energy absorption of the appliance. A
reduced wall gap will not restrict the
function of the appliance. The energy
absorption may then change slightly.
Fig.
4
Installation in numerical sequence.
Aligning the appliance
Place the appliance in the designated
location and align. The appliance must
be level. If the floor is uneven, use
the front height-adjustable feet. Adjust
the height-adjustable feet with a wrench.