en
Basic operation
18
6.13 Accessories
Use original accessories. These have
been made especially for your appli-
ance.
The accessories for your appliance
depend on the model.
Ice scoop
You can use the ice scoop to remove
a portion of ice cubes.
Basic operation
7 Basic operation
Basic operation
7.1 Switching on the appli-
ance
1.
Electrically connect the appliance.
→
Note:
If the appliance has been
previously switched off using the
control panel, press
.
a
The appliance begins to cool.
2.
Switch off the warning signal using
.
a
goes out as soon as the
set temperature has been reached.
3.
Set the required temperature.
→
7.2 Operating tips
¡
Once you have switched on the
appliance, the set temperature is
only reached after several hours.
Do not put any food in the appli-
ance until the temperature has
been reached.
¡
The front and side panels of
the housing heat up occasionally.
This prevents condensation from
forming.
¡
When you close the door, a va-
cuum may be created. The door is
then difficult to open again. Wait a
moment until the vacuum is offset.
7.3 Switching off the appli-
ance
▶
Press
.
7.4 Setting the temperature
unit
You can choose between the temper-
ature unit °F and °C.
1.
Press
.
2.
Press
.
3.
Press
/
(Submenu setting)
until the setting display submenu
shows or .
4.
Press
.
7.5 Setting the temperature
Setting the refrigerator
compartment temperature
▶
Press
/
(Refrigerator com-
partment) repeatedly until the tem-
perature display (refrigerator com-
partment) shows the required tem-
perature.
The recommended temperature in
the refrigerator compartment is
4 °C (39 °F).
Setting the freezer compartment
temperature
▶
Press
/
(Freezer compart-
ment) repeatedly until the temper-
ature display (freezer compart-
ment) shows the required temper-
ature.
The recommended temperature in
the freezer compartment is −18 °C
(0 °F).
